This Acceptance Test Plan (ATP) is provided for participation in the testing of the project’s functionality. This ATP fulfills the following objectives:

To provide information necessary to effectively test the modules.

To establish a comprehensive test plan and to communicate to the user the nature and extent of the tests deemed necessary to provide a basis for implementation and operation.

To provide a written record of test inputs to exercise critical capabilities, the instructions to execute the test, and the expected outputs.

PREREQUISITES

The following are prerequisites to participate in the ATP:

Ability to access the system and log on.

Ability to use system functions and Graphical User Interface (GUI) environment.

Access to functional specifications for screens.

The ATP will provide a means to determine the accuracy and completeness of modules. The system functions are numbered and titled at the top of each test packet.

For each system function a list of testing scenarios is provided. Basically, these scenarios are all the conditions that must be tested and are prefixed with the system function number. Each scenario’s tests have step‑by‑step instructions to execute and an unexpected result. All input test values are provided for the ATP user to enter. If an ATP user does not obtain the expected result or the test could not be conducted, the project’s problem report must be completed to document the problem. The user will be notified when to retest.

Tests assigned to the user are:

Change History

Version	Date	Revision Descriptions	Tester’s Name

ACCEPTANCE TEST PLAN
SET UP FOR TESTING
System Function #:	Module:
Function Title:	Role:
SCENARIO #:	Reference Requirements Document Page #:
SCENARIO TITLE:
Directions:

Step 1

Commonwealth of Pennsylvania	4.B_PATP_Final

Department of Environmental Protection

Project Acceptance Test Plan

<Enter Project Name Here>

1 of 2	12/8/2005

<Location of Project "file path">

Commonwealth of Pennsylvania

mmcdaniel

2005-10-17

mahockenbe